Installation guide

8-8 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide

Compaq Confidential – Need to Know Required

Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by

Devin

Part Number: 203510-001 File Name: i-ch08 Server Cabling-J.doc Last Saved On: 7/12/01 1:46 PM

IMPORTANT: Keep the screws provided with your auxiliary VHDCI SCSI cable. You use

these screws to install the cable in the server.

5. Connect the cable to Smart Array 5i Controller connector A on the

system board and to the blank space on the rear of the chassis

6. Insert the cable into the open space and secure it with the two screws

you removed in step 4

Figure 8-8. Installing the auxiliary VHDCI SCSI cable

For additional information about installing, cabling, and configuring the Smart

Array 5i Controller, see Chapter 6, “Smart Array 5i Controller,” or visit the

Compaq website: