Installation guide

Server Cabling 8-7
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: i-ch08 Server Cabling-J.doc Last Saved On: 7/12/01 1:46 PM
To install the auxiliary VHDCI SCSI cable:
1. Locate the auxiliary VHDCI SCSI blank on the rear panel.
Figure 8-6. Auxiliary VHDCI SCSI blank
2. Use the short end of the Torx T-15 tool provided with your server to
remove the screw from the top of the blank.
3. Remove the blank from the server.
Figure 8-7. Removing the VHDCI SCSI blank
4. Use the long, flat end of the Torx T-15 tool to remove both screws from
the auxiliary SCSI cable provided with your option kit.