Installation guide

8-4 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: i-ch08 Server Cabling-J.doc Last Saved On: 7/12/01 1:46 PM
IDE CD-ROM Drive
In your Compaq ProLiant ML370 Generation 2 server, the CD-ROM drive is
mounted in the top bay of the removable media area. The following illustration
shows standard cable routing in a rack configuration for a point-to-point IDE
cable connecting the CD-ROM drive to the IDE connector on the system
board. For information about replacing the CD-ROM drive, refer to your
maintenance and service guide.
Figure 8-3. Cabling the CD-ROM drive to the system board (rack server)