Installation guide

Remote Insight Lights-Out Edition Options 7-13

Compaq Confidential – Need to Know Required

Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by

Devin

Part Number: 203510-001 File Name: h-ch07 Remote Insight Lights-Out Edition-J.doc Last Saved On: 7/13/01 11:50 AM

IMPORTANT: To allow LAN access to a Remote Insight board, you must attach the LAN

cable to the RJ-45 connector on the board. The standard RJ-45 connectors on the

server’s rear panel do not provide network access to the Remote Insight board.

13. Power up the server. See “Powering Up the Server” in Chapter 4,

“Installing the Rack Server,” or Chapter 5, “Installing the Tower

Server.”

Configuration and Operation

For advanced instruction on configuring and operating a Remote Insight

board, refer to the user guide included with your option kit or to the Compaq

website: