Installation guide

Remote Insight Lights-Out Edition Options 7-11
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: h-ch07 Remote Insight Lights-Out Edition-J.doc Last Saved On: 7/13/01 11:50 AM
9. Locate the Remote Insight board external connectors on the rear of the
server, as shown in the following illustration and table.
Figure 7-3. Remote Insight board connectors (rack server)
Table 7-2
Remote Insight Board External Connectors
Item Description
AC power adaptor
Video connector
Keyboard/mouse connector
RJ-45 connector
Note: Do not use the keyboard/mouse cable when the Remote Insight
internal interface cable is installed. The internal Remote Insight interface
cable replaces the functions provided by these items.
10. Disconnect your video cable from the standard external video connector
on the rear panel of the server.
IMPORTANT: Always connect your video cable to the external video connector on the
Remote Insight board. When a Remote Insight board is installed in a ProLiant ML370
server, the video connector on the server rear panel is not functional.