Installation guide

7-8 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced Checked by
Devin
Part Number: 203510-001 File Name: h-ch07 Remote Insight Lights-Out Edition-J.doc Last Saved On: 7/13/01 11:50 AM
■
Group administration
Compaq Remote Insight Configuration Language can be used for
writing group administration procedural scripts for the Compaq Remote
Insight Lights-Out Edition boards. Remote Insight Configuration
Language uses Extensible Markup Language (XML). Detailed
instructions and a sample file on how to write a user configuration script
are available in this user guide. Group administration for the Remote
Insight board can be done independently of Compaq Insight Manager
XE by using batch processing.
Installation
To install a Remote Insight Lights-Out Edition board:
1. Power down the server. See “Powering Down the Server” in Chapter 3,
“Installing Hardware Options.”
CAUTION: To avoid the risk of damage to your system or expansion boards,
remove all AC power cords before installing or removing expansion boards.
When the Power On/Standby button is in the off position, auxiliary power is still
connected to the PCI expansion slot and may damage the board.
2. Remove the access panel. See “Removing the Access Panel” in
Chapter 3, “Installing Hardware Options.”