Installation guide

Smart Array 5i Controller 6-13
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: g-ch06 Smart Array 5i Controller-J.doc Last Saved On: 7/13/01 11:45 AM
Installing the Center Wall
After you have installed the Smart Array 5i Controller and connected all
devices that are cabled internally to the Smart Array connectors, reinstall the
center wall:
1. Position the center wall over the center wall bracket and lower partially
into place. Leave enough room to connect the fan cable to the system
board.
Figure 6-13. Installing the center wall
2. Reconnect the center wall fan cable to the fan signal connector on the
system board.
Figure 6-14. Connecting fan cables