Installation guide

Smart Array 5i Controller 6-11
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: g-ch06 Smart Array 5i Controller-J.doc Last Saved On: 7/13/01 11:45 AM
4. Use the long end of the Torx T-15 tool to remove both screws from the
auxiliary VHDCI SCSI cable.
Figure 6-11. Removing the auxiliary VHDCI SCSI blank
NOTE: The auxiliary blank and T-15 screw are not reused and may be discarded.
5. Insert one end of the auxiliary VHDCI SCSI cable in Smart Array 5i
connector A
.
6. Insert the other end of the auxiliary cable into the space left when you
removed the VHDCI SCSI blank and secure with the two screws you
removed in step 4
.
Figure 6-12. Installing the auxiliary VHDCI SCSI cable