Installation guide

Smart Array 5i Controller 6-5
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: g-ch06 Smart Array 5i Controller-J.doc Last Saved On: 7/13/01 11:45 AM
7. Repeat steps 3 through 6 for other expansion boards installed in the
server.
NOTE: Make note of the initial slot location for each expansion board as it is removed.
Reinstall all boards in their original locations.
Removing the Center Wall
To remove the center wall:
1. Loosen all four thumbscrews and lift the wall up slightly so that the
fan cables have some free play
.
Figure 6-3. Loosening the center wall