Installation guide

Installing the Tower Server 5-7
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced
Part Number: 203510-001 File Name: f-ch05 Installing the Tower Server-J.doc Last Saved On: 7/12/01 1:33 PM
When the server powers on for the first time, the server performs POST and
launches RBSU. Select your initial language and operating system then insert
the SmartStart CD in the CD-ROM to begin configuration.
IMPORTANT: Before installing an operating system on a new server or previously
unconfigured boot drive, you must configure the server with RBSU.
Installing an Operating System
To configure the server for the first time:
1. Start the server. The system automatically launches RBSU at initial
startup.
2. When prompted, select a language.
3. Select the operating system you want to install on your server. A dialog
box displays, indicating that the system configuration is complete.
4. Press the F10 key to exit RBSU or press any other key to return to the
RBSU main menu.
5. Insert the SmartStart CD or your operating system installation CD.
Figure 5-4. Inserting the CD into the tower server
NOTE: Your CD-ROM drive may look different from the one shown in this chapter.
6. Restart the server.
7. Follow the instructions provided by SmartStart or the operating system
manufacturer.