Installation guide

Installing the Tower Server 5-3
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced
Part Number: 203510-001 File Name: f-ch05 Installing the Tower Server-J.doc Last Saved On: 7/12/01 1:33 PM
Connecting the Power Cord and
Peripheral Devices
After all internal hardware options have been installed in the server, connect
external power supplies and peripheral devices to the connectors located on
the rear panel of the server. Icons on the back of the server identify the
function of each connector.
WARNING: To reduce the risk of electrical shock or fire, do not plug
telecommunications/telephone connectors into the NIC receptacles.
CAUTION: If a Remote Insight Lights-Out Edition is installed in your server,
ensure that you connect your video cable into the video connector on the rear of
the Remote Insight Lights-Out Edition expansion board. The standard video
connector on the server rear panel is not used when the Remote Insight
Lights-Out Edition is installed. For more information, see Chapter 7, “Remote
Insight Lights-Out Edition Options.”