Installation guide

4-22 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: e-ch04 Installing the Rack Server-J.doc Last Saved On: 7/12/01 1:31 PM
Rack Options
In addition to the rack kit provided with your server, there are rack option kits
available that allow you to install your ProLiant ML370 Generation 2 server
into a Telco or any third-party rack.
Telco Rack Option
The Telco rack adapter kit includes rack rail, installation hardware, and
instructions for installing your ProLiant ML370 Generation 2 servers into a
Telco rack. For information about obtaining an optional Telco rack adapter kit,
contact your Compaq authorized reseller or visit the Compaq website:
www.compaq.com/support/options/
WARNING: When installing the server in a Telco rack, ensure that the rack
frame is adequately secured to the top and bottom of the building structure.
Third-Party Rack Option
The third-party rack adapter kit includes rack rail, installation hardware, and
instructions for installing your ProLiant ML370 Generation 2 servers into any
four-sided rack. For information about obtaining an optional third-party rack
adapter kit, contact your Compaq authorized reseller or visit the Compaq
website:
www.compaq.com/support/options/