Installation guide
Installing the Rack Server 4-19
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: e-ch04 Installing the Rack Server-J.doc Last Saved On: 7/12/01 1:31 PM
5. Insert the SmartStart CD or your operating system installation CD.
NOTE: Grasp the CD from the edges, not the flat surfaces of the disc.
Figure 4-18. Inserting the CD into the rack server
NOTE: Your CD-ROM drive may look different from the one shown in this chapter.
6. Restart the server.
7. Follow the instructions provided by SmartStart or the operating system
manufacturer.
For more information about using RBSU or SmartStart to configure your
server, see Chapter 9, “Server Configuration and Utilities.”
After RBSU configures your hardware for the first time, use SmartStart to
install an operating system.
The ProLiant ML370 Generation 2 server supports the following operating
systems:
■ Microsoft Windows NT and Windows 2000
■ Linux
■ Novell NetWare
■ SCO OpenServer and UnixWare
■ Sun Solaris Intel Platform Edition
■ IBM OS/2