Installation guide

4-16 Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Generation 2 Server Setup and Installation Guide Comments: Graphics Replaced - Checked
Part Number: 203510-001 File Name: e-ch04 Installing the Rack Server-J.doc Last Saved On: 7/12/01 1:31 PM
To secure the power cord:
1. Push the upper tab of the power supply retaining clip to release the cord
loop
.
2. Flip the lower tab down to open the cord loop .
Figure 4-15. Releasing the power cord retaining clip
3. Thread the power cord through the retaining clip.
4. Flip the lower tab up toward the chassis until it snaps into place to
secure the power cord.
Figure 4-16. Securing the power cord in the retaining clip