Instruction Manual

Hardware options installation 82
8.
Install the TPM board. Press down on the connector to seat the board.
9. Install the TPM security rivet by pressing the rivet firmly into the system board.
10. If removed, install the full-length PCI expansion cards in slots 5 and 6 ("Installing an expansion board"
on page 63).
11. If removed, install the PCI air baffle ("PCI air baffle option" on page 38).
12. Install the access panel (on page 26).
13. Return the server to an upright position.
14. Lock the front bezel (on page 24).
15. Connect each power cord to the server.
16. Connect each power cord to the power source.
17. Power up the server (on page 23).