Instruction Manual

Hardware options installation 54
6.
If installed, remove the PCI air baffle (on page 27).
7. Remove the system air baffle (on page 28).
8. Remove any installed full-length PCI expansion cards ("Remove the full-length expansion board" on
page 29).
9. Remove the fan modules and the fan blank (on page 30).
10. If already installed, disconnect the drive cables from the rear of the drives.
11. Remove the non-hot-plug drive cage from chassis.
12. Use the screws on the drive cage to install the drives.
13. Install the drive into the non-hot-plug drive cage.