QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Overview HP ProLiant ML150 Generation9 (Gen9) The HP ProLiant ML150 Gen9 Server delivers the essential mix of performance, price and expandability to fit the needs of growing budget conscious businesses. Designed as a dual-socket tower server, it is a right size tower with performance and expandability. With expansion options, it allows you to grow as needed with a low initial capital outlay.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Overview 7. 8. 9. +1 ODD + 1 Tape Drive (Full/Half), or 2) 9LFF + 1 ODD, or 3) 9LFF + 1 Tape Drive (Full/Half). Power On/Standby button and system power LED button NIC status Health LED Rear View (Tower Model) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. PCI Slots (Slots 1-6) Slot 1 and 3 can support Optional GPU Unit ID LED USB 2.0 (2) USB 3.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Overview Interior View (Rack Model) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Power Supply Sixteen (16) DDR4 DIMM slots. Shown fully populated in 16 slots (8 per processor) System Fans: Three fans for 2P SKU Internal USB 3.0 connector Internal USB 2.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Standard Features NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon. Intel® Xeon® processor E5-2600 v3 product family is designed to deliver the best combination of performance, built-in capabilities, and costeffectiveness. One (or two) of the following Intel® Xeon® E5-2600 v3 processors based on the model.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Standard Features NOTE: Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number. NOTE: Six total expansion PCIe 3.0 slots. Two PCIe 3.0 x16 (x16 speed); Four PCIe 3.0 x 8 (x8 speed).
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Standard Features HP Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need for enterprise class efficiency and reliability while maintaining lowest possible hardware costs. All Entry-Level power supply options have been designed specifically for HP ProLiant Gen9 Essential Series servers. The HP 550W FIO Power Supply is the standard, non-redundant AC power supply option for most HP ProLiant Gen9 Essential servers.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Standard Features Up to 16 DIMM slots Redundant Power Supply Tower to rack conversion Optional optical drive (up to 1) NOTE: When populate 10 LFF, not able to install Optical Drive. Possible Configurations: 1) 8LFF +1 ODD + 1 Tape Drive (Full/Half), or 2) 9LFF + 1 ODD, or 3) 9LFF + 1 Tape Drive (Full/Half). Industry Standard Compliance ACPI 2.0b Compliant PCIe 3.0 Compliant PXE Support WOL Support Novell Certified IPMI 2.0, SMASH CLP, DCMI 1.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Standard Features Server utilities Intelligent Provisioning Provision servers by discovering and deploying 1 to few servers with Intelligent Provisioning. Learn more at http://www.hp.com/go/intelligentprovisioning.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Optional Features Embedded Management iLO Essentials HP iLO Essentials is the preferred license for small and medium business that offers full remote server management capabilities for small and medium business via the Integrated Remote Console (IRC), virtual media, and e-mail based alerts. Learn more about HP iLO Essentials at http://www.hp.com/go/iLO/essentials.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Optional Features Storage Device Management Software Maximize your investment in HP storage and networking with software that enables hardware-specific configuration, performance tuning and connectivity management. HP StoreVirtual VSA With HP StoreVirtual VSA you can use the power of virtualization to create a virtual array within your host server. Manage it as a single pool of shared storage capacity, and scale it to match your evolving needs.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Service and Support Service and Support HP Technology Services for Industry Standard Servers HP Technology Services delivers confidence, reduces risk and helps customers realize agility and stability. Connect to HP to help prevent problems and solve issues faster. Our support technology lets you to tap into the knowledge of millions of devices and thousands of experts to stay informed and in control, anywhere, any time.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Service and Support HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty, HP Care Pack or HP contractual support agreement. ** HP Support Center Mobile App is subject to local availability.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Pre-configured Models For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. 1. Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs. 2. HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped separately.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Pre-configured Models Warranty Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day response.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Configuration Information - Factory Integrated Models This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements. 1. Factory Integrated Models must start with a CTO Server. 2.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Configuration Information - Factory Integrated Models NOTE: LRDIMM, RDIMM are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen9 servers support LRDIMM and RDIMM. NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen9.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Configuration Information - Factory Integrated Models HP ML150 Gen9 Mini SAS H240 Cable Kit HP ML150 Gen9 Mini SAS P440/P840 Cable Kit Battery Holder HP ML150 Gen9 Smart Storage Battery Holder Kit 784606-B21 784608-B21 786710-B21 Step 3: Choose Additional Factory Integratable Options BIOS Mode HP Legacy FIO Mode Setting NOTE: If B140i is the only primary controller, then this option cannot be selected.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Core Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. HP Unique Options HP ML150 Gen9 4LFF Hot Plug Drive Cage 725872-B21 NOTE: Adding 4LFF Hard Drive Cage allow up to 8FF Drive Bays.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Core Options HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit Load Reduced DIMMs (LRDIMMs) for E5-2600v3 Series 759934-B21 726719-B21 HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit 726720-B21 HP Optical Drives HP 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive HP 9.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Core Options HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives 658071-B21 HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive HP 500GB 6G SATA 7.2K rpm LFF (3.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Core Options Hard Drive Blank Kits HP Large Form Factor Hard Drive Blank Kit HP Small Form Factor Hard Drive Blank Kit HP Networking HP Power Supplies 1 Gigabit Ethernet adapters HP Ethernet 1Gb 4-port 331T Adapter HP Ethernet 1Gb 2-port 361T Adapter HP Ethernet 1Gb 2-port 332T Adapter 10 Gigabit Ethernet adapters HP Ethernet 10Gb 2-port 560SFP+ Adapter HP Ethernet 10Gb 2-port 561T Adapter 666986-B21 666987-B21 647594-B21 652497-B21 615732-B21 665249-B21
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Additional Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Additional Options HP Tape Backup HP Power Distribution Units (PDUs) HP ML150 Gen9 Mini SAS P440/P840 Cable Kit Battery Holder 784608-B21 HP ML150 Gen9 Smart Storage Battery Holder Kit 786710-B21 NOTE: For the complete range of tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape. For hardware and software compatibility of HP tape backup products see: http://www.hp.com/storage/SPOCK and http://www.hp.com/go/ebs.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Additional Options HP 13.2kVA 480 Volt IEC309 30A 3-Phase Input (15 Outlet) NA Basic PDU H3X07A HP 19.9kVA 480 Volt IEC309 30A 3-Phase Input (30 Outlet) NA Basic PDU H3X08A HP 800VA - 277V Input / 230V Output NA Rack Mount Transformer H3X09A HP 2.8kVA 24A Low Voltage NA/JP Modular Power Distribution Unit 252663-D71 HP 4.9kVA 24A High Voltage NA/JP Core Modular Power Distribution Unit 252663-D74 HP 8.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Additional Options HP Managed Power Distribution Units (maPDU) HP 2.8kVA 120 Volt L5-30 Input (24x NEMA 5-20) NA/JP Managed PDU HP 3.6kVA 200-240 Volt Detachable C20 Input (7xC13/1xC19) WW Managed PDU HP 4.9kVA 208 Volt L6-30 Input (20xC13/4xC19) NA/JP Managed PDU HP 8.6kVA 208 Volt L15-30 3 Phase Input (18xC13/6xC19) NA/JP Managed PDU HP 8.6kVA 208 Volt L21-30 3 Phase Input (20xC13/3xC19/1x NEMA 5-20) NA/JP Managed PDU HP 14.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Additional Options NOTE: To learn more, please visit the HP Uninterruptible Power Systems (UPS) web page.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Memory Memory Subsystem Architecture Each Intel® Xeon® E5-2600v3 family processor socket contains four memory channels per installed processor with two DIMMs per channel for a total of eight (8) DIMMs or a grand total of sixteen (16) DIMMs for the server. Memory Population guidelines General Memory Population Rules and Guidelines: . Install DIMMs only if the corresponding processor is installed. .
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Memory Intel Gen9 Supported Memory Bandwidth for HP ProLiant Gen9 Intel® Xeon®E5-2600v3 Series Processor Family Memory Bandwidth and Capacity [DIMM Type] DIMM Rank DIMM Capacity 4GB Voltage SLOTS THAT CAN BE POPULATED 16 slot servers MAXIMUM CAPACITY (GB) 64 Single Rank Dual Rank 8GB Std Voltage 1.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Memory Standard and Maximum Memory Capacity (Preconfigured Models) Pre-Configured Models Standard Memory E5-2603v3, E5-2609v3, E5-2620v3, 4GB (1x4GB) 8GB (1x8GB) 16GB (1x16GB) Maximum Memory Plus Optional Memory 244GB (15x16GB, 1x4GB) 248GB (15x16GB, 1x8GB) 256GB (15x16GB, 1x16GB) Standard Memory Replaced with Optional Memory 256GB (16x16GB) 256GB (16x16GB) 256GB (16x16GB) DDR4 memory options part number decoder NOTE: Capacity references are rounded t
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Storage 4-bay LFF non-hot-plug drive model 8-bay SFF hot-plug drive model 4-bay LFF hot-plug drive model 1-8 8 x LFF SATA/SSD Non-hot-plug Hard Drive Bays 9-10 Media Bays NOTE: When populating 10 LFF, not able to install Tape Drive or Optical Drive. Possible Configurations: 1) 8LFF +1 ODD+ 1 Tape Drive (Full/Half), or 2) 9LFF + 1ODD, or 3) 9LFF + 1 Tape Drive (Full/Half).
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Technical Specifications System Unit Tower Dimensions 17.03(H) x 7.87(W) x 24.41(D) in (43.26 x 20 x 62 cm) Tower Weight Minimum: Maximum: Input Requirements Range Line Voltage (for Standard 460W Rated Input Current PSU, see power specifications tables Rated Input Frequency for detail on 460W, 750W and 1200W Rated Input Power power supplies) BTU Rating Maximum Power Specifications Power Supply Output System Inlet Temperature 37.26lb (16.9kg) 61.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Technical Specifications Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). Idle L WAd 3.8 Bels (1P LFF Non Hot-Plug Entry) 3.8 Bels (1P LFF Hot-plug Base) 4.
QuickSpecs HP ProLiant ML150 Generation9 (Gen9) Technical Specifications HP Ethernet 1Gb 4- Network Interface 10Base-T/100Base-TX/1000Base-TX port 331i Adapter Compatibility IEEE 802.3 10Base-T IEEE 802.3ab 1000Base-T IEEE 802.
