User guide

System LEDs and Switches
Table E-8: QuickFind Diagnostic Display LEDs continued
Item Description Status Action
8 Therm trip Off = normal
On = attention required
The server experienced a thermal
shutdown.
If one of the CPU thermal LEDs is amber,
that CPU experienced an overtemperature
condition.
• Make sure that the processor heatsink
is properly attached. For more
information, refer to the maintenance
and service guide.
• Make sure the correct DIMMs (1.2"
tall) are installed.
• Make sure all fans are installed and
working properly
9 SCSI interlock Off = normal
On = attention required
Ensure the SCSI backplane is installed
properly.
Reseat SCSI backplane board and hard
drives.
10 Power supply 1 Off = normal
On = attention required
Look at the LEDs on the front of the power
supply and take the appropriate action.
11 Power supply 2 Off = normal
On = attention required
Look at the LEDs on the front of the power
supply and take the appropriate action.
12 Bus error Off = normal
On = attention required
A bus error occurred.
The error may have been caused by one of
the adapter cards on this bus (see amber
LEDs for which slots may have caused the
error).
Reseat adapter cards.
If problem persists, remove/replace one or
both of the cards.
E-12 HP ProLiant DL585 Server User Guide