Specifications

Server Component Identification
Table 4-6: QuickFind Diagnostic Display LEDs continued
Item Description Status Action
5 Temperature Off = normal
On = attention required
One or more components have experienced an elevated
temperature or a thermal shutdown.
A thermal shutdown is indicated by the Therm Trip LED.
• Be sure the processor heatsink is properly attached.
• Be sure there are no 1.7-inch DIMMs installed that
prevent airflow across the processor heatsink).
• Be sure the correct DIMMs (1.2 inches tall) are
installed.
• Be sure that all fans are installed and working
properly.
• Be sure that the server environment meets posted
requirements.
For information about server environment requirements
refer to the HP ProLiant DL585 Server User Guide on the
documentation CD or at
www.hp.com/support.
6 DIMM Off = normal
On = attention required
DIMM failure or configuration error. Refer to the IML or
POST messages.
7 I/O power fault Off = normal
On = attention required
A power fault on the system I/O board occurred. If
problem persists, replace the system I/O board.
8 Therm trip Off = normal
On = attention required
The server experienced a thermal shutdown.
If one of the CPU thermal LEDs is amber, that CPU
experienced an overtemperature condition.
• Be sure that the processor heatsink is properly
attached. For more information, refer to Chapter 5,
“Troubleshooting.”
• Be sure there are no 1.7-inch DIMMs installed that
prevent airflow across the processor heatsink).
• Be sure the correct DIMMs (1.2 inches tall) are
installed.
• Be sure all fans are installed and working properly.
9 SCSI interlock Off = normal
On = attention required
Be sure the SCSI backplane is installed properly.
10 Power supply 1 Off = normal
On = attention required
Look at the LEDs on the front of the power supply and
take the appropriate action.
11 Power supply 2 Off = normal
On = attention required
Look at the LEDs on the front of the power supply and
take the appropriate action.
4-8 HP ProLiant DL585 Server Maintenance and Service Guide