Specifications

Removal and Replacement Procedures
Memory Options
Minimum Memory Requirements
•
•
•
•
Two DIMMs must be installed in bank 1 on the processor memory board in slot two.
All DIMMs on a processor memory board must have the same part number.
NOTE: Processor memory boards in slots 1, 3, and 4 may be installed without memory.
Memory Population Guidelines
Supported configurations:
DIMMs on different processor memory boards can be of different sizes, but DIMMs on
the same processor memory board must be of the same size and have the same part
number.
DIMMs must be installed on a processor memory board in pairs and in bank order.
Figure 2-13: DIMM slots
Table 2-2: Processor Memory Board Memory Banks
Slot Bank
1 - 2 Bank 1
3 - 4 Bank 2
5 - 6 Bank 3
7 - 8 Bank 4
2-16 HP ProLiant DL585 Server Maintenance and Service Guide