Specifications

Removal and Replacement Procedures
Removing the Server from the Rack
WARNING: The server is very heavy, up to 44.5 kg (98 lb). To reduce the risk of
personal injury or damage to the equipment:
• Remove all hot-plug power supplies to reduce the weight of the server before
lifting it.
• Observe local occupational health and safety requirements and guidelines for
material handling.
• Get help to lift and maneuver the server.
To remove the server from the rack:
1. Power down the server. Refer to “Powering Down the Server” earlier in this chapter.
2. Extend the server from the rack. Refer to “Extending the Server from the Rack” earlier in
this chapter.
3. Unplug the cables from the rear of the server.
4. Press the rail release levers on the rails and slide the server off the rack rails.
Figure 2-7: Removing the server from the rack
5. Place the server on a sturdy, level surface.
Reverse steps to install the server into the rack.
HP ProLiant DL585 Server Maintenance and Service Guide 2-9