Specifications

Index
performance balancing 2-30
SCSI cables 2-32
slot population 2-30
server from rack 2-9
POST error messages 5-8
Torx T-15 tool 2-5
power button/LED assembly, removing and
replacing 2-28
replacing
fans, hot-plug 2-23
power supply blank, removing and replacing 2-21
server in rack 2-7
power supply, removing and replacing 2-22
ROM
powering up, normal sequence 5-2
BIOS problem dignosis 5-9
preparation procedures
problem diagnosis 5-9
overview 2-3
updates on the Web 2-10
removing server from the rack 2-9
ROM Based Setup Utility, described 3-2
processor memory boards
ROMPaq Utility, described 3-2
air baffle 2-12, 2-15
cautions 2-10
S
installing 2-12, 2-14
SCSI backplane, removing and replacing 2-39
locating 2-11
SCSI cables, removing and replacing 2-32
processor power modules (PPMs), when to
replace 5-8
server
extending from the rack 2-6
processors See processor memory boards. See
processor memory boards
mechanical components 1-2
removing from rack 2-9
ProLiant Essentials
replacing in rack 2-7
diagnosing installation failure 5-9
system components 1-4
installation problems 5-9
warnings and cautions 2-2
memory problems 5-9
spare part numbers
mechanical components 1-2
Q
system components 1-4
QuickFind Diagnostic Display
static electricity, prevention 2-1
LEDs, location 4-7
switches
LEDs, status 4-7
iLO/ Redundant ROM Override (SW5) 4-20
internal diagnostic display 4-15
non-maskable interrupt 4-21
R
rear unit identification 4-22
rack
system board 4-16
extending the server 2-6
system ID (SW4) 4-19
replacing server 2-7
system battery, installing 2-41
rail release levers
system board
locating 2-7
iLO/ Redundant ROM Override switch
(SW5) 4-20
warning 2-7
RBSU See ROM-Based Setup Utility
removing and replacing 2-42
rear fan cage, removing and replacing 2-36
switches 4-16
removable media board, removing and
replacing 2-35
system ID switch (SW4) 4-19
system components part numbers 1-4
removal and replacement procedures
system components, illustrated 1-3
preparation 2-3
System Erase Utility
removing
caution 5-9
access panel 2-8
uses 5-9
Battery-Backed Write Cache (BBWC)
assembly 2-37
system ID switch (SW4)
locating 4-19
fans, hot-plug 2-23
settings 4-19
front fan cage 2-33
media board 2-35
T
media drive 2-24
technician notes ix
pass-through board 2-34
telephone numbers xi
rear fan cage 2-36
thumbscrews, front panel 2-6
SCSI backplane 2-39
HP ProLiant DL585 Server Maintenance and Service Guide Index-3