User guide

Hardware options installation 55
15.
Install fan modules 3 and 4.
16. Install the fan blank.
17. Install the air baffle (on page 21).
18. If removed, install the BBWC battery pack or the FBWC capacitor pack ("Installing the BBWC battery
pack or the FBWC capacitor pack" on page 57).
19. Install hard drives or hard drive blanks into each bay.
20. Install the access panel (on page 20).
21. Slide the server into the rack.
22. Power up the server (on page 18).
23. Determine the status of the hard drive from the SAS and SATA hard drive LED combinations.
Controller options
The server ships with an embedded Smart Array P410i Controller. Upgrade options exist for the integrated
array controller. For a list of supported options, see the QuickSpecs on the HP website
(http://www.hp.com/support).