Owner manual

Troubleshooting 111
Server Fault Indications Flowchart
Symptoms:
• Server boots, but a fault event is reported by Insight Management Agents (on
page 80
)
•
•
•
•
•
Server boots, but the internal health LED or external health LED is red or
amber
NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.
Possible causes:
Improperly seated or faulty internal or external component
Unsupported component installed
Redundancy failure
System overtemperature condition
Item Refer to
1 "Management Agents (on page 80)" or in the HP ProLiant
Servers Troubleshooting Guide located on the Documentation
CD or on the HP website (http://www.hp.com/support
).
2 • "Integrated Management Log (on page 85)" in the HP
ProLiant Servers Troubleshooting Guide located on the
Documentation CD or on the HP website
(http://www.hp.com/support
).
• "Event List Error Messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or
on the HP website (http://www.hp.com/support
).
3 Server user guide, located on the Documentation CD, or the HP
website (http://www.hp.com/products/servers/platforms
)
4 System Management Homepage at https://localhost:2381
(https://localhost:2381)
5 "Power-On Problems ("Power-On Problems Flowchart" on page
103
)" in the HP ProLiant Servers Troubleshooting Guide
located on the Documentation CD or on the HP website
(http://www.hp.com/support
).