User Manual

Hardware options installation 63

Install the mezzanine card. Press down on the connector to seat the card.

8. Install the access panel (A-side).

9. Install the server blade ("Installing a server blade" on page 32).

10. Power up the server blade (on page 16).

Installing a mezzanine card option (B-side)

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION: Always wear an antistatic wrist strap when working inside the server.

To install the component:

1. Power down the server blade (on page 16).

2. Remove the server blade (on page 17).

3. Place the server blade on a flat, level surface with the correct side of the server blade facing up. To

determine the correct side, see the label attached to the access panel.

4. Remove the access panel (B-side) (on page 18).

5. Remove the interposer board (on page 23).