Owner manual

be designated for PXE in RBSU. For NIC connector locations, refer to the documentation included with the
server blade.
IC numeration depends on several factors, including the OS installed on the NOTE: Actual N
server blade.
o deploy an OS to multiple server blades, install a PXE deployment server on a network.
Deployment infrastructure
T
IMPORTANT: To connect to a network with a Pass-Thru module, always connect the Pass-Thru
module to a network device that supports Gigabit speed.
To es d PXE deployment infrastructure, provide the following software and minimum
hardware:
• e
eater recommended), AMD Athlon™ 64 processor,
ndows® XP OS
yption
o C with 10/100 RJ-45 connector
o orking and an IP address compatible with one of the following: the iLO 2 Diagnostic
IP address
o drive
o e Environment versions:
Runtime Environment versions at the
HP website
rchive/index.html
tablish a network-base
Cli nt PC (administrative workstation)
o AMD Athlon™ XP processor (700 MHz or gr
or Intel® Pentium® III or higher processor (700 MHz or greater recommended)
o 128 MB of RAM
o Microsoft® Windows® 2000 Professional or Microsoft® Wi
o Microsoft® Internet Explorer 5.5 or above with 128-bit encr
Ethernet NI
TCP/IP netw
Port IP address or an assigned DHCP or static
CD-ROM drive, CD/DVD-ROM drive, and/or diskette
Any of the following Java™ Runtim
1.3.1_02
1.3.1_07
1.3.1_08
1.4.1 for Windows® users only
1.4.2 for Linux users only
Access the Java™
(
http://java.sun.com/products/a ).
• ment)
greater recommended), AMD Athlon™ 64 processor,
o
d drive space
• E ver (storing boot images)
ded), AMD Athlon™ 64 processor,
ended)
DHCP server (IP address assign
o AMD Athlon™ XP processor (700 MHz or
or Intel® Pentium® or Pentium® II 200-MHz or faster processor
64 MB of RAM
o 64 MB of free har
o 10-Mb/s network adapter
PX deployment ser
o AMD Athlon™ XP processor (700 MHz or greater recommen
or Intel® Pentium® III or higher processor (500 MHz recomm
o 256 MB of RAM
Software and configuration utilities 35