User guide

Table Of Contents
Troubleshooting 75
NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
Improperly seated or faulty internal or external component
Unsupported component installed
Redundancy failure
System overtemperature condition
Item See
1
"Integrated Management Log (on page 57)" or in the HP ProLiant
Servers Troubleshooting Guide located on the Documentation CD or
see "Troubleshooting resources (on page 60)"
"Event list error messages" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page 60)"
2
"Component identification (on page 6)"
3
System Management Homepage (https://localhost:2381)
4
"Power-on problems flowchart ("Server blade power-on problems
flowchart" on page 68)"
5
"Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page 60)"
Maintenance and service guides for c-Class server blades, located on
the Documentation CD or the HP website
(http://www.hp.com/go/bladesystem/documentation)
"HP contact information (on page 87)"
6
"Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page 60)"
Maintenance and service guides for c-Class server blades, located on
the Documentation CD or the HP website
(http://www.hp.com/go/bladesystem/documentation)