Specifications

Removal and replacement procedures 39
System board
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Remove all hard drives ("Hard drive" on page 24).
5. Remove the DIMM baffle ("DIMM baffle" on page 25).
6. Remove all DIMMs ("DIMMs" on page 26).
7. Remove all mezzanine cards ("Mezzanine card" on page 27).
8. Remove the SD card module ("SD card module" on page 38).
9. Remove the battery tray ("Battery tray" on page 37).
10. Remove the heatsink ("Heatsink" on page 30).
11. Open the processor locking lever and the processor socket retaining bracket.
12. Using the processor tool, remove the processor from the system board.
a. Line up the processor tool, ensuring the locking lever graphic on the tool is oriented correctly.
b. Press in on the plastic tabs, and then place the tool on the processor.