Specifications

Removal and replacement procedures 37
6.
Apply all the grease to the top of the processor in the following pattern to ensure even distribution.
7. Install the heatsink. Insert both screws, and then alternate tightening until the heatsink is seated properly.
8. Install the access panel ("Access panel" on page 24).
9. Install the server blade.
Battery tray
This component is available for use with future options.
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).