Owner's manual

Hardware options installation 40
3.
Remove the access panel (on page 14).
4. Remove the DIMM baffle (on page 14).
5. Open the DIMM slot latches.
6. Install the DIMM.
7. Install all DIMM baffles ("Install the DIMM baffle" on page 15).
8. Install the access panel (on page 14).
9. Install the server blade ("Installing a server blade" on page 25).
10. Power up the server blade (on page 12).
Mezzanine card option
Optional mezzanine cards are classified as Type A mezzanine cards and Type B mezzanine cards. The type
of the mezzanine card determines where it can be installed in the server blade.
• Install Type A mezzanine cards on Mezzanine 1 connector or Mezzanine 2 connector.
• Install Type B mezzanine cards on Mezzanine 2 connector.
Optional mezzanine cards enable network connectivity or provide Fibre Channel support. For mezzanine
card locations, see the system board components (on page 8).
For mezzanine card mapping, see the HP ProLiant BL465c Gen8 Server Blade Installation Instructions or see
"Interconnect bay numbering and device mapping (on page 23)."
To install the component:
1. Power down the server blade (on page 12).
2. Remove the server blade (on page 13).
3. Remove the access panel (on page 14).