User Manual

Setting Up the System
Setting Up IP Security
IP security allows an administrator to define a set of IP addresses that are the only
ones allowed to connect to the services provided (SSH, HTTP, TELNET, SNMP).
This means that an administrator can make sure only a certain set of machines have
access to Integrated Administrator. A maximum of five IP addresses can be entered.
Table 5-4: IP Security Commands
Function Command
Add an IP address ADD IPMANAGER <ip address>
Remove an IP address REMOVE IPMANAGER <ip
address>
Enable IP Security ENABLE IPSECURITY
Disable IP Security DISABLE IPSECURITY
Setting Up Automatic Time Configuration (NTP)
Automatic time configuration allows the Integrated Administrator to synchronize its
date and time with a server supporting the Network Time Protocol (NTP).
Table 5-5: Automatic Time Configuration Commands
Function Command
Set the NTP poll interval* SET NTP POLL <seconds>
Set the primary NTP server SET NTP PRIMARY <ip address>
Set the secondary NTP server SET NTP SECONDARY
<ip address>
Disable the secondary NTP server SET NTP SECONDARY NONE
Enable NTP ENABLE NTP
Disable NTP DISABLE NTP
HP ProLiant BL e-Class Integrated Administrator User Guide 5-25
HP CONFIDENTIAL
Writer: Hilary Stead File Name: f-ch5 Setting Up the System.doc
Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:50 AM