User guide
Table Of Contents
- Scanner overview
- Use the scanner
- Useful scanner features
- Care and maintenance
- Troubleshooting
- Basic troubleshooting tips
- Scanner installation troubleshooting
- Scanner initialization or hardware problems
- Scanner operation problems
- Scanner will not turn on
- Scanner does not scan right away
- Scanner scans only one side of a two-sided page
- Scanned images are not straight
- Scanned image is fuzzy
- Optimize scanning and task speeds
- The scan is completely black or completely white
- Vertical black stripes appear on the scanned image
- Scan files are too large
- Scanner buttons are not working correctly
- Scanner paper path problems
- Product support
- Specifications
- Index
Load documents
The HP Scanjet 1000 is a duplex scanner, which means it can scan one side of the
page or both sides of the page at the same time. However, the HP Scanjet 1000 can
only scan one page at a time.
1. To scan a single side of the page, insert the page face up with the top of the page
pointing to the paper feed slot.
To scan both sides of the page, insert the 1
st
page face up with the top of the page
pointing to the paper feed slot.
2. Align the original to the left side of the paper feed slot.
Load a card into the paper feed slot
To load a card into the paper feed slot, follow these steps:
1. Place the card face up with the long dimension parallel to the paper feed slot and make
sure the top of the card points to the paper feed slot.
2. Align the original to the left side of the paper feed slot.
Scan a document
The following topics describe how to scan originals using the scanner and the scanner
software.
• Tips on scanning
• Scan from the scanner button
• Scan from TWAIN-compliant scanning software
Use the scanner
7