Reference Guide

MIB descriptions
COLUBRIS-SATELLITE-MANAGEMENT-MIB
3-73
 satelliteSecureWebPort
.1.3.6.1.4.1.8744.5.7.1.1.1.1.11 read-only
Indicates the secure web port on which the satellite listens. The value zero is used when
no information could be retrieved from the satellite device.
 satelliteDeviceMacAddress
.1.3.6.1.4.1.8744.5.7.1.1.1.1.12 read-only
Indicates the MAC address of the satellite access point bridge interface.
 satelliteProductName
.1.3.6.1.4.1.8744.5.7.1.1.1.1.13 read-only
Indicates the product name for the device in printable ASCII characters.
 satelliteFirmwareRevision
.1.3.6.1.4.1.8744.5.7.1.1.1.1.14 read-only
Indicates the revision number of the device firmware in printable ASCII characters.
 satelliteGroupName
.1.3.6.1.4.1.8744.5.7.1.1.1.1.15 read-only
Indicates the location-aware group name of the satellite. The group name is only returned
when location-aware is enabled at the satellite. An empty string is returned otherwise.
 satelliteChannelNumberRadio2
.1.3.6.1.4.1.8744.5.7.1.1.1.1.16 read-only
Indicates the wireless channel number the radio 2 is operating on.
 satelliteVLAN
.1.3.6.1.4.1.8744.5.7.1.1.1.1.17 read-only
Management VLAN.
 satelliteDetectionPort
.1.3.6.1.4.1.8744.5.7.1.1.1.1.18 read-only
The detection packet is send on this interface.
satelliteNumber
.1.3.6.1.4.1.8744.5.7.1.1.2 read-only
Indicates the number of satellites present in the satellite table.
satelliteUpNotificationEnabled
.1.3.6.1.4.1.8744.5.7.1.2.1 read-write
Specifies if satelliteUpNotification notifications are generated.
satelliteDownNotificationEnabled
.1.3.6.1.4.1.8744.5.7.1.2.2 read-write
Specifies if satelliteDownNotification notifications are generated.