Reference Guide

MIB descriptions
COLUBRIS-SATELLITE-MANAGEMENT-MIB
3-72
 satelliteEntry
.1.3.6.1.4.1.8744.5.7.1.1.1.1 not-accessible
Information about a Satellite access point currently registered by the Master access point.
satelliteIndex - Uniquely identifies a device in the satellite table.
 satelliteIndex
.1.3.6.1.4.1.8744.5.7.1.1.1.1.1 not-accessible
Index of a the satellite in the satelliteTable.
 satelliteDeviceId
.1.3.6.1.4.1.8744.5.7.1.1.1.1.2 read-only
Device ID of a the satellite in the satelliteTable.
 satelliteMacAddress
.1.3.6.1.4.1.8744.5.7.1.1.1.1.3 read-only
Indicates the MAC address of the wireless radio of the satellite access point.
 satelliteIpAddress
.1.3.6.1.4.1.8744.5.7.1.1.1.1.4 read-only
Indicates the IP address of the satellite access point.
 satelliteName
.1.3.6.1.4.1.8744.5.7.1.1.1.1.5 read-only
Indicates the name of the satellite access point.
 satelliteSSID
.1.3.6.1.4.1.8744.5.7.1.1.1.1.6 read-only
Indicates the SSID of the satellite access point.
 satelliteChannelNumber
.1.3.6.1.4.1.8744.5.7.1.1.1.1.7 read-only
Indicates the wireless channel number the satellite access point is operating on.
 satelliteForwardWirelessToWireless
.1.3.6.1.4.1.8744.5.7.1.1.1.1.8 read-only
Indicates if the forwarding of traffic between wireless client stations is enabled on the
satellite access point.
’true’: indicates that the forwarding feature is enabled.
’false’: indicates that no forwarding takes place.
 satelliteMasterTrafficOnly
.1.3.6.1.4.1.8744.5.7.1.1.1.1.9 read-only
Indicates if the satellite will only forward traffic that is addressed to the MAC address of
the Master access point.
 satelliteSNMPPort
.1.3.6.1.4.1.8744.5.7.1.1.1.1.10 read-only
Indicates the SNMP port on which the satellite listens. The value zero is used when no
information could be retrieved from the satellite device.