Reference Guide

MIB descriptions
COLUBRIS-QOS-MIB
3-55
 coQOSQueueId
.1.3.6.1.4.1.8744.5.13.1.1.1.1.1 not-accessible
Queue identifier used to access the statistics.
 coQOSTransmittedFrameCount
.1.3.6.1.4.1.8744.5.13.1.1.1.1.2 read-only
This counter increments only when an acknowledged MPDU with an individual address in
address 1 field, or MPDU with a multicast address in the address 1 field of type Data or
Management is transmitted.
 coQOSMulticastTransmittedFrameCount
.1.3.6.1.4.1.8744.5.13.1.1.1.1.3 read-only
This counter increments only when the multicast bit is set in the destination MAC address
of a successfully transmitted MSDU. When operating as a STA in an ESS, where these
frames are directed to the AP, this implies having received an acknowledgment to all
associated MPDUs.
 coQOSFailedCount
.1.3.6.1.4.1.8744.5.13.1.1.1.1.4 read-only
This counter increments when an MSDU is not transmitted successfully due to the
number of transmit attempts exceeding either the coQOSShortRetryLimit or
coQOSLongRetryLimit.
 coQOSRetryCount
.1.3.6.1.4.1.8744.5.13.1.1.1.1.5 read-only
This counter increments when an MSDU is successfully transmitted after one or more
retransmissions. This is basically a total of single and multiple retry counts.
 coQOSMultipleRetryCount
.1.3.6.1.4.1.8744.5.13.1.1.1.1.6 read-only
This counter increments when an MSDU is successfully transmitted after more than one
retransmission.
 coQOSFrameDuplicateCount
.1.3.6.1.4.1.8744.5.13.1.1.1.1.7 read-only
This counter increments when a frame is received that the Sequence Control field
indicates is a duplicate.
 coQOSReceivedFrameCount
.1.3.6.1.4.1.8744.5.13.1.1.1.1.8 read-only
This counter shall be incremented for each successfully received MPDU of type Data or
Management. This is basically a total of unicast and multicast received frames.
 coQOSMulticastReceivedFrameCount
.1.3.6.1.4.1.8744.5.13.1.1.1.1.9 read-only
This counter incremenst when an MPDU is received with the multicast bit set in the
destination MAC address.