Reference Guide

MIB descriptions
COLUBRIS-PUBLIC-ACCESS-MIB
3-39
 publicAccessUserApRadioIndex
.1.3.6.1.4.1.8744.5.1.1.3.6.1.22 read-only
Indicates the radio to which this user is associated. The index 0 is reserved when location
aware is not enabled or not properly configured. It means that the system could not
determine on which interface the user is connected. Please note that this information is
not related to the standard SNMP interface table. It is a proprietary index information on
the Radios in Colubris devices.
 publicAccessUserConfigIndex
.1.3.6.1.4.1.8744.5.1.1.3.6.1.23 read-only
Indicates the configuration profile in the publicAccessUsersConfigTable currently
associated with this user. When location aware is not enabled or not properly configured,
the first SSID of the first radio interface is used as the default configuration profile.
 publicAccessUserConnectedInterface
.1.3.6.1.4.1.8744.5.1.1.3.6.1.24 accessible-for-notify
Indicates the device’s logical public interface to which the user is connected. This will
always be a string containing ’br0’.
 publicAccessUserBytesSentDropped
.1.3.6.1.4.1.8744.5.1.1.3.6.1.25 read-only
Indicates the total number of bytes sent by the user and dropped due to rate limitation.
When this counter reaches its maximum value, it wraps around and starts increasing
again from zero.
 publicAccessUserBytesReceivedDropped
.1.3.6.1.4.1.8744.5.1.1.3.6.1.26 read-only
Indicates the total number of bytes received for the user and dropped due to rate
limitation. When this counter reaches its maximum value, it wraps around and starts
increasing again from zero.
 publicAccessUserPacketsSentDropped
.1.3.6.1.4.1.8744.5.1.1.3.6.1.27 read-only
Indicates the total number of packets sent by the user and dropped due to rate limitation.
When this counter reaches its maximum value, it wraps around and starts increasing
again from zero.
 publicAccessUserPacketsReceivedDropped
.1.3.6.1.4.1.8744.5.1.1.3.6.1.28 read-only
Indicates the total number of packets received for the user and dropped due to rate
limitation. When this counter reaches its maximum value, it wraps around and starts
increasing again from zero.
 publicAccessUserRateLimitationEnabled
.1.3.6.1.4.1.8744.5.1.1.3.6.1.29 read-only
Specifies if rate limitation is enabled for the user.
 publicAccessUserMaxTransmitRate
.1.3.6.1.4.1.8744.5.1.1.3.6.1.30 read-only
Specifies the maximum transmit rate for the user.