Manualshelf

Reference Guide

ManualsBrandsHP ManualsSoftwareHP ProCurve Guest Management Software
61626364656667686970
MIB descriptions
COLUBRIS-PUBLIC-ACCESS-MIB
3-38
publicAccessUserBytesReceived
.1.3.6.1.4.1.8744.5.1.1.3.6.1.11 read-only
Indicates the total number of bytes received by the user. When this counter reaches its
maximum value, it wraps around and starts increasing again from zero.
publicAccessUserPacketsSent
.1.3.6.1.4.1.8744.5.1.1.3.6.1.12 read-only
Indicates the total number of IP packets sent by the user. When this counter reaches its
maximum value, it wraps around and starts increasing again from zero.
publicAccessUserPacketsReceived
.1.3.6.1.4.1.8744.5.1.1.3.6.1.13 read-only
Indicates the total number of IP packets received by the user. When this counter reaches
its maximum value, it wraps around and starts increasing again from zero.
publicAccessUserForceDisconnection
.1.3.6.1.4.1.8744.5.1.1.3.6.1.14 read-write
Setting this attribute to ’adminReset’ disconnects the user with a cause of
ADMIN_RESET. Reading this variable always return ’idle’.
publicAccessUserStationMacAddress
.1.3.6.1.4.1.8744.5.1.1.3.6.1.15 read-only
Indicates the user’s MAC Address.
publicAccessUserApMacAddress
.1.3.6.1.4.1.8744.5.1.1.3.6.1.16 read-only
Indicates the user’s Access Point MAC Address when Location- Aware is enabled or the
Access Controller MAC Address.
publicAccessUserGroupName
.1.3.6.1.4.1.8744.5.1.1.3.6.1.17 read-only
Indicates the user’s Access Point Group Name (ONLY when Location-aware is enabled
and properly configured). If this information is not available, a zero-Length string is
returned.
publicAccessUserSSID
.1.3.6.1.4.1.8744.5.1.1.3.6.1.18 read-only
Indicates the user’s Access Point SSID (ONLY when Location-aware is enabled and
properly configured). If this information is not available, a zero-Length string is returned.
publicAccessUserSecurity
.1.3.6.1.4.1.8744.5.1.1.3.6.1.19 read-only
Specifies the user’s security mode.
publicAccessUserPHYType
.1.3.6.1.4.1.8744.5.1.1.3.6.1.20 read-only
Specifies the user’s radio type.
publicAccessUserVLAN
.1.3.6.1.4.1.8744.5.1.1.3.6.1.21 read-only
Specifies the VLAN currently assigned to the user.