Reference Guide

MIB descriptions
COLUBRIS-PUBLIC-ACCESS-MIB
3-37
 publicAccessUserEntry
.1.3.6.1.4.1.8744.5.1.1.3.6.1 not-accessible
Information about a particular user that has been authenticated by the authentication
system. publicAccessUserIndex - Uniquely identifies a user in the table.
 publicAccessUserIndex
.1.3.6.1.4.1.8744.5.1.1.3.6.1.1 not-accessible
Index of a user in the publicAccessUserTable.
 publicAccessUserAuthenType
.1.3.6.1.4.1.8744.5.1.1.3.6.1.2 read-only
Indicates the mechanism used to authenticate the user.
 publicAccessUserAuthenMode
.1.3.6.1.4.1.8744.5.1.1.3.6.1.3 read-only
Specifies how user authentication is performed. It can be done using a local user list
defined on the device or AAA server profile. If both modes are active the local user list is
checked first.
 publicAccessUserState
.1.3.6.1.4.1.8744.5.1.1.3.6.1.4 read-only
Indicates the current state of the user.
 publicAccessUserStationIpAddress
.1.3.6.1.4.1.8744.5.1.1.3.6.1.5 read-only
Indicates the user’s IP address.
 publicAccessUserName
.1.3.6.1.4.1.8744.5.1.1.3.6.1.6 read-only
Indicates the user’s name.
 publicAccessUserSessionStartTime
.1.3.6.1.4.1.8744.5.1.1.3.6.1.7 read-only
Indicates when this user session was started.
 publicAccessUserSessionDuration
.1.3.6.1.4.1.8744.5.1.1.3.6.1.8 read-only
Indicates how long the user’s session has been active. When this counter reaches its
maximum value, it wraps around and starts increasing again from zero.
 publicAccessUserIdleTime
.1.3.6.1.4.1.8744.5.1.1.3.6.1.9 read-only
Indicates for how long the user’s session has been idle. When this counter reaches its
maximum value, it wraps around and starts increasing again from zero.
 publicAccessUserBytesSent
.1.3.6.1.4.1.8744.5.1.1.3.6.1.10 read-only
Indicates the total number of bytes sent by the user. When this counter reaches its
maximum value, it wraps around and starts increasing again from zero.