Reference Guide

MIB descriptions
COLUBRIS-PUBLIC-ACCESS-MIB
3-35
publicAccessDeviceAccountingEnabled
.1.3.6.1.4.1.8744.5.1.1.2.7 read-only
Identifies if accounting information is generated by the device and sent to the AAA server. The
device generate RADIUS accounting of type ON and OFF. This also covers accounting of all
access-lists independently of where they are used. For accounting, the following status types
are generated: START, INTERIM-UPDATE, and STOP. Accounting information is generated
only if a valid AAA server profile is configured in the
publicAccessDeviceAccountingProfileIndex attribute.
publicAccessDeviceAccountingProfileIndex
.1.3.6.1.4.1.8744.5.1.1.2.8 read-only
Identifies the AAA server profile to use for device accounting. This attribute only applies when
publicAccessDeviceAccountingEnabled is set to ’enable’. When the special value zero is
specified, the value set inside publicAccessDeviceAuthenProfileIndex is used instead.
publicAccessDeviceForceReconfiguration
.1.3.6.1.4.1.8744.5.1.1.2.9 read-write
Specify forceReconfiguration(1) to force the device to re-read the local configuration file or re-
issue an authentication request to the AAA server, or both based on the value of the
publicAccessDeviceConfigMode attribute. Reading this object always returns ’idle’. Re-issuing
an authentication only applies if a valid AAA server profile is specified in
publicAccessDeviceAuthenProfileIndex.
publicAccessUsersMaxCount
.1.3.6.1.4.1.8744.5.1.1.3.1 read-only
Indicates the maximum number of concurrent authenticated users.
publicAccessUsersCount
.1.3.6.1.4.1.8744.5.1.1.3.2 read-only
Indicates the number of currently authenticated users.
publicAccessUsersThreshold
.1.3.6.1.4.1.8744.5.1.1.3.3 read-write
Specifies the trigger value for sending the publicAccessUsersThresholdTrap. When the number
of users logged into the public access interface is equal to or exceeds this threshold value, a
publicAccessUsersThresholdTrap is sent. The threshold value cannot exceed
publicAccessUsersMaxCount or an error is returned. Set this to zero to disable sending of the
publicAccessUsersThresholdTrap.
publicAccessUsersSessionTrapEnabled
.1.3.6.1.4.1.8744.5.1.1.3.4 read-write
When set to enable, the publicAccessUsersSessionStart and publicAccessUsersSessionStop
traps are generated when a user session begins or ends.
publicAccessUsersConfigTable
.1.3.6.1.4.1.8744.5.1.1.3.5 not-accessible
Provides information on the user’s authentication method. In tabular form to allow multiple
instances on an agent.
 publicAccessUsersConfigEntry
.1.3.6.1.4.1.8744.5.1.1.3.5.1 not-accessible
An entry in the table.