Reference Guide

MIB descriptions
COLUBRIS-WDS-MIB
3-33
 coWDSLinkSignal
.1.3.6.1.4.1.8744.5.33.1.4.1.1.16 read-only
Strength of the wireless signal.
 coWDSLinkNoise
.1.3.6.1.4.1.8744.5.33.1.4.1.1.17 read-only
Level of local background noise.
coWDSNetworkScanTable
.1.3.6.1.4.1.8744.5.33.1.5.1 not-accessible
Conceptual table for local mesh network scans.
 coWDSNetworkScanEntry
.1.3.6.1.4.1.8744.5.33.1.5.1.1 not-accessible
An Entry (conceptual row) in the WDS Network Scan Table.
coWDSScanRadioIndex - Radio number where the local mesh peer was detected.
coWDSScanPeerIndex - Uniquely identify a local mesh peer on a radio inside the local
mesh network scan table.
 coWDSScanRadioIndex
.1.3.6.1.4.1.8744.5.33.1.5.1.1.1 not-accessible
Radio number on which the local mesh peer was detected.
 coWDSScanPeerIndex
.1.3.6.1.4.1.8744.5.33.1.5.1.1.2 not-accessible
Uniquely identify a local mesh peer on a radio.
 coWDSScanGroupId
.1.3.6.1.4.1.8744.5.33.1.5.1.1.3 read-only
Mesh ID used by the local mesh peer.
 coWDSScanPeerMacAddress
.1.3.6.1.4.1.8744.5.33.1.5.1.1.4 read-only
MAC address of the local mesh peer.
 coWDSScanChannel
.1.3.6.1.4.1.8744.5.33.1.5.1.1.5 read-only
Channel on which the local mesh peer is transmitting.
 coWDSScanSNR
.1.3.6.1.4.1.8744.5.33.1.5.1.1.6 read-only
Signal noise ratio of the local mesh peer.
 coWDSScanMode
.1.3.6.1.4.1.8744.5.33.1.5.1.1.7 read-only
Current mode of the local mesh peer.
 coWDSScanAvailable
.1.3.6.1.4.1.8744.5.33.1.5.1.1.8 read-only
Peer is accepting connections.