Reference Guide

MIB descriptions
COLUBRIS-WDS-MIB
3-32
 coWDSLinkRadio
.1.3.6.1.4.1.8744.5.33.1.4.1.1.3 read-only
Radio number where the local mesh peer was detected.
 coWDSLinkPeerMacAddress
.1.3.6.1.4.1.8744.5.33.1.4.1.1.4 read-only
MAC address of the local mesh peer.
 coWDSLinkMaster
.1.3.6.1.4.1.8744.5.33.1.4.1.1.5 read-only
Indicates if this link is a link to a master node, which provides access to the root network
for the mesh.
 coWDSLinkAuthorized
.1.3.6.1.4.1.8744.5.33.1.4.1.1.6 read-only
Encryption, if any, can proceed.
 coWDSLinkEncryption
.1.3.6.1.4.1.8744.5.33.1.4.1.1.7 read-only
Indicates the encryption used by the local mesh link.
 coWDSLinkIdleTime
.1.3.6.1.4.1.8744.5.33.1.4.1.1.8 read-only
Inactivity time.
 coWDSLinkSNR
.1.3.6.1.4.1.8744.5.33.1.4.1.1.9 read-only
Signal noise ratio of the local mesh peer.
 coWDSLinkTxRate
.1.3.6.1.4.1.8744.5.33.1.4.1.1.10 read-only
Current transmit rate of the local mesh peer.
 coWDSLinkRxRate
.1.3.6.1.4.1.8744.5.33.1.4.1.1.11 read-only
Current receive rate of the local mesh peer.
 coWDSLinkIfIndex
.1.3.6.1.4.1.8744.5.33.1.4.1.1.12 read-only
ifIndex of the associated interface in the ifTable.
 coWDSLinkHT
.1.3.6.1.4.1.8744.5.33.1.4.1.1.13 read-only
Indicates if the link is using high throughput data rates.
 coWDSLinkTxMCS
.1.3.6.1.4.1.8744.5.33.1.4.1.1.14 read-only
Current transmit MCS of the HT local mesh peer.
 coWDSLinkRxMCS
.1.3.6.1.4.1.8744.5.33.1.4.1.1.15 read-only
Current receive MCS of the HT local mesh peer.