Reference Guide

MIB descriptions
COLUBRIS-DEVICE-WIRELESS-MIB
3-16
 coDevWirCliStaWME
.1.3.6.1.4.1.8744.5.25.1.7.1.1.19 read-only
true: The wireless station sends QOS data frames.
false: The wireless station sends data frames.
 coDevWirCliStaPreviousAPAddress
.1.3.6.1.4.1.8744.5.25.1.7.1.1.20 read-only
Indicates the if the station roamed from this access point.
 coDevWirCliStaResetStats
.1.3.6.1.4.1.8744.5.25.1.7.1.1.21 read-write
Reset the wireless client statistics. Reading this object will always return ’idle’.
resetStats: Reset the client statistics.
resetRates: Reset the client statistics rates.
resetAll: Perform both operations.
 coDevWirCliStaHT
.1.3.6.1.4.1.8744.5.25.1.7.1.1.22 read-only
Indicates that the associated station is HT.
 coDevWirCliStaTransmitMCS
.1.3.6.1.4.1.8744.5.25.1.7.1.1.23 read-only
Current transmit MCS of an HT associated station.
 coDevWirCliStaReceiveMCS
.1.3.6.1.4.1.8744.5.25.1.7.1.1.24 read-only
Current receive MCS of an HT associated station.
 coDevWirCliStaChannelWidth
.1.3.6.1.4.1.8744.5.25.1.7.1.1.25 read-only
Channel width used by the wireless client.
 coDevWirCliStaShortGI
.1.3.6.1.4.1.8744.5.25.1.7.1.1.26 read-only
Indicates if the wireless client is using short GI.
 coDevWirCliDisassociate
.1.3.6.1.4.1.8744.5.25.1.7.1.1.27 read-write
Disassociate the wireless client. Reading this object will always return ’idle’.
disassociate: disassociate the client.
 coDevWirCliStaNbStreams
.1.3.6.1.4.1.8744.5.25.1.7.1.1.28 read-only
Number of spatial streams used with the HT client.
 coDevWirCliStaQOSLevel
.1.3.6.1.4.1.8744.5.25.1.7.1.1.29 read-only
QOS level assigned by a RADIUS server.