Reference Guide

MIB descriptions
COLUBRIS-DEVICE-WIRELESS-MIB
3-12
 coDevWirIfStsMulticastReceivedFrameCount
.1.3.6.1.4.1.8744.5.25.1.3.1.1.11 read-only
This counter is incremented when an MSDU is received with the multicast bit set in the
destination MAC address.
 coDevWirIfStsFCSErrorCount
.1.3.6.1.4.1.8744.5.25.1.3.1.1.12 read-only
This counter is incremented when an FCS error is detected in a received MPDU.
 coDevWirIfStsTransmittedFrameCount
.1.3.6.1.4.1.8744.5.25.1.3.1.1.13 read-only
This counter is incremented for each successfully transmitted MSDU.
 coDevWirIfStsReceivedFrameCount
.1.3.6.1.4.1.8744.5.25.1.3.1.1.14 read-only
This counter is incremented when an MSDU is received.
coDeviceWirelessVscStatusTable
.1.3.6.1.4.1.8744.5.25.1.5.1 not-accessible
Device Virtual Service Communities status attributes.
 coDeviceWirelessVscStatusEntry
.1.3.6.1.4.1.8744.5.25.1.5.1.1 not-accessible
An entry in the coDeviceWirelessVscStatusTable.
coDevDisIndex - Uniquely identifies a device on the controller.
coDevWirIfStaRadioIndex - Uniquely identifies a radio on the device.
coDevWirVscStaVscIndex - Uniquely identifies a Virtual Service Community in the device
configuration file.
 coDevWirVscStaVscIndex
.1.3.6.1.4.1.8744.5.25.1.5.1.1.1 not-accessible
Specifies the index of a Virtual Service Community in the device configuration file.
 coDevWirVscStaMscVscIndex
.1.3.6.1.4.1.8744.5.25.1.5.1.1.2 read-only
Link to the Virtual Service Community in the device configuration file (coVscCfgIndex).
 coDevWirVscStaBSSID
.1.3.6.1.4.1.8744.5.25.1.5.1.1.3 read-only
MAC Address assigned to the Virtual Service Community running on the specified radio.
 coDevWirVscStaDefaultVLAN
.1.3.6.1.4.1.8744.5.25.1.5.1.1.4 read-only
VLAN ID assigned to a station after a successfull 802.11 association.
 coDevWirVscStaMaximumNumberOfUsers
.1.3.6.1.4.1.8744.5.25.1.5.1.1.5 read-only
Maximum number of wireless client stations that can use the VSC on a specific radio.