Reference Guide

MIB descriptions
COLUBRIS-DEVICE-WIRELESS-MIB
3-8
 coDev1xStaEapolRxFrame
.1.3.6.1.4.1.8744.5.32.1.3.1.1.1 read-only
The number of valid EAPOL frames of any type that have been received by this
Authenticator.
 coDev1xStaEapolTxFrame
.1.3.6.1.4.1.8744.5.32.1.3.1.1.2 read-only
The number of EAPOL frames of any type that have been transmitted by this
Authenticator.
 coDev1xStaBackendResponses
.1.3.6.1.4.1.8744.5.32.1.3.1.1.3 read-only
Counts the number of times that the state machine sends an initial Access-Request packet
to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE
state). Indicates that the Authenticator attempted communication with the
Authentication Server.
 coDev1xStaBackendChallenges
.1.3.6.1.4.1.8744.5.32.1.3.1.1.4 read-only
Counts the number of times that the state machine receives an initial Access-Challenge
packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the
RESPONSE state). Indicates that the Authentication Server has communication with the
Authenticator.
 coDev1xStaBackendAuthSuccesses
.1.3.6.1.4.1.8744.5.32.1.3.1.1.5 read-only
Counts the number of times that the state machine receives an EAP-Success message
from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from
RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to
the Authentication Server.
 coDev1xStaBackendAuthFails
.1.3.6.1.4.1.8744.5.32.1.3.1.1.6 read-only
Counts the number of times that the state machine receives an EAP-Failure message from
the Authentication Server (i.e., aFail becomes TRUE, causing a transition from
RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the
Authentication Server.
COLUBRIS-DEVICE-WIRELESS-MIB
This MIB is used to view the status and statistics of each wireless interface, Virtual Service
Community (VSC), wireless client, and detected access point, available on each of the access
points managed by a controller.
COLUBRIS-DEVICE-WIRELESS-MIB OIDs
coDevWirSNRLevelNotificationEnabled
.1.3.6.1.4.1.8744.5.25.1.1.1 read-write
This attribute, when true, enables the generation of SNR level notifications.