Reference Guide

MIB descriptions
COLUBRIS-SYSTEM-MIB
3-131
systemConfigurationVersion
.1.3.6.1.4.1.8744.5.6.1.1.6 read-write
User-defined string to identify the current device configuration. This string could be anything in
printable ASCII characters.
systemUpTime
.1.3.6.1.4.1.8744.5.6.1.1.7 read-only
How long the system has been running since its last restart. When this counter reaches its
maximum value, it wraps around and starts increasing again from zero.
systemMacAddress
.1.3.6.1.4.1.8744.5.6.1.1.8 accessible-for-notify
MAC address of the device. This information is only returned in a systemHeartbeatNotification
event.
systemWanPortIpAddress
.1.3.6.1.4.1.8744.5.6.1.1.9 accessible-for-notify
IP address of the device WAN port. This information is only returned in a
systemHeartbeatNotification event.
systemProductFlavor
.1.3.6.1.4.1.8744.5.6.1.1.10 read-only
The product flavor can extend or alter the functionality of a HP product.
systemDeviceIdentification
.1.3.6.1.4.1.8744.5.6.1.1.11 read-only
Manufacturing Ethernet base MAC address.
systemFirmwareBuildDate
.1.3.6.1.4.1.8744.5.6.1.1.12 read-only
Build date of the device firmware in the format YYYY/MM/DD.
systemControllerMode
.1.3.6.1.4.1.8744.5.6.1.1.13 read-only
Indicates the current controller mode.
systemCDPOperState
.1.3.6.1.4.1.8744.5.6.1.1.14 read-only
When True indicates that CDP support is enabled.
systemLLDPOperState
.1.3.6.1.4.1.8744.5.6.1.1.15 read-only
When True indicates that the LLDP agent is started.
systemTimeUpdateMode
.1.3.6.1.4.1.8744.5.6.1.2.1 read-write
Specifies the method and format used to set the system time.
’manual’: Operator must configures the system time parameters manually in the GMT zone.
’sntpUdp’: Look for time servers in the systemTimeServerTable in order to synchronize the
device system time using SNTP.