Reference Guide

MIB descriptions
COLUBRIS-802DOT11-MIB
3-126
 coDot11CurrentSecondaryChannel
.1.3.6.1.4.1.8744.5.4.3.14.1.4 read-only
This attribute indicates the channel number of the secondary channel. If 20/40 MHz mode
is not currently in use, this attribute value is 0.
 coDot11GreenfieldOptionImplemented
.1.3.6.1.4.1.8744.5.4.3.14.1.5 read-only
This attribute, when TRUE, indicates that the HT Greenfield option is implemented.
 coDot11GreenfieldOptionEnabled
.1.3.6.1.4.1.8744.5.4.3.14.1.6 read-only
This attribute, when TRUE, indicates that the HT Greenfield option is enabled.
 coDot11ShortGIOptionInTwentyImplemented
.1.3.6.1.4.1.8744.5.4.3.14.1.7 read-only
This attribute, when TRUE, indicates that the Short Guard option is implemented for 20
MHz operation.
 coDot11ShortGIOptionInTwentyEnabled
.1.3.6.1.4.1.8744.5.4.3.14.1.8 read-only
This attribute, when TRUE, indicates that the Short Guard option is enabled for 20 MHz
operation.
 coDot11ShortGIOptionInFortyImplemented
.1.3.6.1.4.1.8744.5.4.3.14.1.9 read-only
Guard option is implemented for 40 MHz operation.
 coDot11ShortGIOptionInFortyEnabled
.1.3.6.1.4.1.8744.5.4.3.14.1.10 read-only
This attribute, when TRUE, indicates that the Short Guard option is enabled for 40 MHz
operation.
 coDot11HighestSupportedDataRate
.1.3.6.1.4.1.8744.5.4.3.14.1.11 read-only
This attribute shall specify the Highest Data Rate in Mbps at which the station may
receive data.
coDot11RSNAStatsTable
.1.3.6.1.4.1.8744.5.4.4 not-accessible
This table maintains statistics for SN. It is not supported on the WCB-200.
 coDot11RSNAStatsEntry
.1.3.6.1.4.1.8744.5.4.4.1 not-accessible
An entry in the coDot11RSNAStatsTable.
 coDot11RSNAStatsVersion
.1.3.6.1.4.1.8744.5.4.4.1.2 read-only
The RSNA version which the AP associated with.