Reference Guide

ManualsBrandsHP ManualsSoftwareHP ProCurve Guest Management Software

141

142

143

144

145

146

147

148

149

150

MIB descriptions

COLUBRIS-802DOT11-MIB

3-124

 coDot11SupportedDataRatesTxIndex

.1.3.6.1.4.1.8744.5.4.3.7.1.1 not-accessible

Index object which identifies which data rate to access.

 coDot11SupportedDataRatesTxValue

.1.3.6.1.4.1.8744.5.4.3.7.1.2 read-only

The transmit bit rates supported by the PLCP and PMD. Data rates are increments of

500Kb/s from 1 Mbps to 63.5 Mbps subject to limitations of each individual PHY.

coDot11SupportedDataRatesRxTable

.1.3.6.1.4.1.8744.5.4.3.8 not-accessible

The receive bit rates supported by the PLCP and PMD. Data rates are increments of 500Kb/s

from 1 Mbps to 63.5 Mbps subject to limitations of each individual PHY.

 coDot11SupportedDataRatesRxEntry

.1.3.6.1.4.1.8744.5.4.3.8.1 not-accessible

An Entry (conceptual row) in the coDot11SupportedDataRatesRx Table.

ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB

module are indexed by ifIndex.

coDot11SupportedDataRatesTxIndex - Uniquely identifies a supported rate in the table.

 coDot11SupportedDataRatesRxIndex

.1.3.6.1.4.1.8744.5.4.3.8.1.1 not-accessible

Index object which identifies which data rate to access.

 coDot11SupportedDataRatesRxValue

.1.3.6.1.4.1.8744.5.4.3.8.1.2 read-only

The receive bit rates supported by the PLCP and PMD. Data rates are increments of

500Kb/s from 1 Mbps to 63.5 Mbps subject to limitations of each individual PHY.

coDot11PhyOFDMTable

.1.3.6.1.4.1.8744.5.4.3.9 not-accessible

Entry of attributes for coDot11PhyOFDMEntry. In tabular form to allow multiple instances on

an agent. This table only apply when in OFDM 5 GHz range.

 coDot11PhyOFDMEntry

.1.3.6.1.4.1.8744.5.4.3.9.1 not-accessible

An entry in the coDot11PhyOFDMEntry Table.

ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB

module are indexed by ifIndex.

 coDot11CurrentFrequency

.1.3.6.1.4.1.8744.5.4.3.9.1.1 read-write

The desired operating frequency channel of the OFDM PHY.

 coDot11TIThreshold

.1.3.6.1.4.1.8744.5.4.3.9.1.2 read-write

The threshold being used to detect a busy medium (frequency). CCA reports a busy

medium upon detecting the RSSI above this threshold.