Reference Guide

MIB descriptions
COLUBRIS-802DOT11-MIB
3-123
coDot11AntennasListTable
.1.3.6.1.4.1.8744.5.4.3.6 not-accessible
This table represents the list of antennae. An antenna can be marked to be capable of
transmitting, receiving, and/or for participation in receive diversity. Each entry in this table
represents a single antenna with its properties. The maximum number of antennae that can be
contained in this table is 255.
 coDot11AntennasListEntry
.1.3.6.1.4.1.8744.5.4.3.6.1 not-accessible
An entry in the coDot11AntennasListTable, representing the properties of a single
antenna.
ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB
module are indexed by ifIndex.
coDot11AntennaListIndex - Uniquely identifies the antenna connected to the 802.11
interface.
 coDot11AntennaListIndex
.1.3.6.1.4.1.8744.5.4.3.6.1.1 not-accessible
The unique index of an antenna which is used to identify the columnar objects in the
coDot11AntennasList Table.
 coDot11SupportedTxAntenna
.1.3.6.1.4.1.8744.5.4.3.6.1.2 read-only
When true, this object indicates that the antenna represented by coDot11AntennaIndex
can be used as a transmit antenna.
 coDot11SupportedRxAntenna
.1.3.6.1.4.1.8744.5.4.3.6.1.3 read-only
When true, this object indicates that the antenna represented by the
coDot11AntennaIndex can be used as a receive antenna.
 coDot11DiversitySelectionRx
.1.3.6.1.4.1.8744.5.4.3.6.1.4 read-only
When true, this object indicates that the antenna represented by coDot11AntennaIndex
can be used for receive diversity. This object may only be true if the antenna can be used
as a receive antenna, as indicated by coDot11SupportedRxAntenna.
coDot11SupportedDataRatesTxTable
.1.3.6.1.4.1.8744.5.4.3.7 not-accessible
The Transmit bit rates supported by the PLCP and PMD, data rates are increments of 500Kb/s
from 1 Mbps to 63.5 Mbps subject to limitations of each individual PHY.
 coDot11SupportedDataRatesTxEntry
.1.3.6.1.4.1.8744.5.4.3.7.1 not-accessible
An Entry (conceptual row) in the coDot11SupportedDataRatesTx Table.
ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB
module are indexed by ifIndex.
coDot11SupportedDataRatesTxIndex - Uniquely identifies a supported rate in the table.