Reference Guide

MIB descriptions
COLUBRIS-802DOT11-MIB
3-121
 coDot11CurrentRxAntenna
.1.3.6.1.4.1.8744.5.4.3.2.1.3 read-only
The current antenna being used to receive, if the coDot11 DiversitySupport indicates that
diversity is not supported. The selected antenna shall be one of the antennae marked for
receive in the coDot11AntennasListTable.
coDot11PhyConfigTable
.1.3.6.1.4.1.8744.5.4.3.3 not-accessible
PHY configuration attributes. In tabular form to allow multiple instances on an agent.
 coDot11PhyConfigEntry
.1.3.6.1.4.1.8744.5.4.3.3.1 not-accessible
An entry in the coDot11PhyConfig Table.
ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB
module are indexed by ifIndex.
 coDot11PhyAdminStatus
.1.3.6.1.4.1.8744.5.4.3.3.1.1 read-write
The desired state of the radio interface.
’up’: Sets the radio interface to be ready to transmit and receive.
’down’: Stops the transmission and reception of packets on the interface.
 coDot11PhyOperStatus
.1.3.6.1.4.1.8744.5.4.3.3.1.2 read-only
The current state of the radio interface.
’up’: The radio interface is ready to ready to transmit and receive.
’down’: The radio is not able to transmit or receive on the interface.
coDot11PhyDSSSTable
.1.3.6.1.4.1.8744.5.4.3.4 not-accessible
Entry of attributes for coDot11PhyDSSSEntry. In tabular form to allow multiple instances on
an agent. This table only apply when in DSSS 2.4 GHz range
 coDot11PhyDSSSEntry
.1.3.6.1.4.1.8744.5.4.3.4.1 not-accessible
An entry in the coDot11PhyDSSSEntry Table.
ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB
module are indexed by ifIndex.
 coDot11CurrentChannel
.1.3.6.1.4.1.8744.5.4.3.4.1.1 read-write
The desired operating frequency channel of the DSSS PHY. Valid channel numbers are as
defined in 15.4.6.2.
 coDot11CCAModeSupported
.1.3.6.1.4.1.8744.5.4.3.4.1.2 read-only
coDot11CCAModeSupported is a bit-significant value, representing all of the CCA modes
supported by the PHY. Valid values are:
energy detect only (ED_ONLY) = 01
carrier sense only (CS_ONLY) = 02