Reference Guide

MIB descriptions
COLUBRIS-802DOT11-MIB
3-118
 coDot11ReceivedFragmentCount
.1.3.6.1.4.1.8744.5.4.2.2.1.10 read-only
This counter is incremented for each successfully received MPDU of type Data or
Management.
 coDot11MulticastReceivedFrameCount
.1.3.6.1.4.1.8744.5.4.2.2.1.11 read-only
This counter is incremented when a MSDU is received with the multicast bit set in the
destination MAC address.
 coDot11FCSErrorCount
.1.3.6.1.4.1.8744.5.4.2.2.1.12 read-only
This counter is incremented when an FCS error is detected in a received MPDU.
 coDot11TransmittedFrameCount
.1.3.6.1.4.1.8744.5.4.2.2.1.13 read-only
This counter is incremented for each successfully transmitted MSDU.
 coDot11WEPUndecryptableCount
.1.3.6.1.4.1.8744.5.4.2.2.1.14 read-only
This counter is incremented when a frame is received with the WEP subfield of the Frame
Control field set to one, and the WEPOn value for the key mapped to the TA’s MAC
address indicates that the frame should not have been encrypted or that frame is
discarded due to the receiving STA not implementing the privacy option.
 coDot11TransmitFrameCount
.1.3.6.1.4.1.8744.5.4.2.2.1.15 read-only
Number of cycles the tx_frame signal is active.
 coDot11ReceiveFrameCount
.1.3.6.1.4.1.8744.5.4.2.2.1.16 read-only
Number of cycles the rx_frame signal is active.
 coDot11ReceiveClearCount
.1.3.6.1.4.1.8744.5.4.2.2.1.17 read-only
Number of cycles the rx_clear signal is active.
 coDot11CycleCount
.1.3.6.1.4.1.8744.5.4.2.2.1.18 read-only
Number of clock cycles.
coDot11PhyOperationTable
.1.3.6.1.4.1.8744.5.4.3.1 not-accessible
PHY level attributes concerned with operation. In tabular form to allow multiple instances on
an agent.
 coDot11PhyOperationEntry
.1.3.6.1.4.1.8744.5.4.3.1.1 not-accessible
An entry in the coDot11PhyOperation Table.
ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB
module are indexed by ifIndex.